This automated optical fiber tensile testing system is designed for operator skill impartial use in creation and lab configurations. Two fundamental design configurations allow the user to select between a set up for standard linear proof testing and with additional mandrels for rotary high power testing.
The linear version is designed for creation evidence screening with causes approximately 22 N. Motorized clamps with carefully designed rubber inserts be sure that the Fiber Coloring Machine will not be ruined inside the testing procedure while concurrently eliminating the need for another air provide. Degrees of tugging force, pulling velocity and hold time are programmable and conveniently offered to the owner with the built-in Liquid crystal display touch-screen manage. Data from tests can be saved and accessed through the USB dock or Ethernet user interface.
Mandrels the exact same style as with NYFORS’ optical fiber recoaters can be mounted on the proof tester in the rotary high power configuration. The fiber is covered round the two mandrels which support it having a unique clamping system. By doing this higher lots can be used onto the fiber, enabling breaking strength assessments below managed circumstances.
Adjustable clamp placement facilitates testing with the highest force levels as well as screening of brief fiber measures. The compact and light weight style makes the instrument easy to move around in a lab atmosphere as well as integrate in a production work table in which space reaches a premium. The machine is actually a compact and light-weight instrument ideal for testing the strength of optical fibers up to 30 N. The device is designed to fulfill all sorts of applications where a power test needs to be carried out.
The device is made using the user in mind. The Fiber Drawing Machine is readily positioned in the carefully guided linear clamps, and also the screening starts automatically using a “One Touch” go button. The built-in microprocessor regulates all of the important guidelines like pulling force, pulling speed and hold time. This allows for a totally managed test each and every time.
The device can be attached to an outside PC, which enables use of all programmable parameters and settings. The machine is tailored to face-on your own use or the incorporation into various subsystems. The equipment comes with an extensive capability of signing and saving information including pulling force, pulling velocity and fiber size along with other parameters.
Two recoat injector designs can be found. The PTR307 utilizes a computerized water pump to inject the recoat material. The amount of material dispensed by the automatic injector is controlled by hand via the top-mounted “Inject” switch or programmed into the machine utilizing the tablet pc control. The PTR307B comes with a manual recoat injection program that needs the user to personally distribute the recoat materials to the mold cavity; another one injector for the PTR307B recoater is accessible listed below. Make sure you note the automatic injector is simply suitable for high-index recoat material, as the manual injector is compatible with both low- and- directory recoat material; both are marketed separately listed below. Please get in touch with Technology Support to learn more.
he handbook injector can be mounted to compatible Optical Fiber Proof-Testing Machine using the 4-40 anchoring screws on the recoater housing (see picture towards the right). Make use of a 3/32″ hex key to safe the injector prior to use. For connecting the PTRRRM towards the recoater mold, tighten the connector at the end of the eco-friendly plastic material tubing, then release by a 1/4 turn to allow for rotation.
The injector is equipped with a syndication valve and two-position choice handle for directing the stream of recoat material. A knurled dispensing attach with the inner plunger works as a syringe for that recoat material. To fill the syringe, point the lever downward (i.e., towards the recoat bottle), then rotate the knurled dispensing attach counterclockwise until it spins freely to fill up the syringe (demonstrated within the picture for the right). Then, to inject the recoat material into the mold, point the handle horizontally (i.e., dealing with the knurled screw) and rotate the attach clockwise until nearby the end of the journey range is achieved. Steer clear of bottoming out iuwekk dispenser because this may damage the internal plunger; also be mindful when re-engaging the threads in order to avoid cross threading the dispensing screw. A number of fill/inject actions may be required until air is displaced within the system. Use lens tissue plus an acetone or alcohol cleansing solution to gather any extra recoat materials that runs from the mold.